N2O Tech Discussion for the use of Nitrous Oxide

need kit for stocker LT1

Thread Tools
 
Search this Thread
 
Old 12-30-2002, 08:08 PM
  #1  
Registered User
Thread Starter
 
94ZRiCeKiLr's Avatar
 
Join Date: Dec 2002
Posts: 821
Question need kit for stocker LT1

i recently got a 94 Z with the small mods in the sig....i want a N20 kit just to kick it up a little nothing serious....maybe like a 75 shot to make sure i dont damage anything....can anyone recommend me a kit for a slightly-better than stock-breathing LT1 that wont require to upgrade my fuel system (for the time being that is) or start replacing motor internals...any help is appreciated
94ZRiCeKiLr is offline  
Old 12-30-2002, 08:51 PM
  #2  
Registered User
 
TriPinTaZ's Avatar
 
Join Date: Dec 2002
Posts: 752
NOS #5176 KIT !
http://www.holley.com/HiOctn/ProdLine/NOS.html
or
www.holley.com and click on the NOS link

GReat KiT, altho alot of people choose the NX system. I dont know why they do but thats their preference.

NOS is the origional Nitrous Brand And I stand by them. I have had no problems whatsoever. You can adjust between 75-125HP with the supplied jets. I upped the Jets and fuel delivery for 175HP on my stock LT1. Serious kick in the pantS! Altho I dont recomend going above 125HP on a stock LT1 unless you are planning a near future rebuild like I am in the process of right now. Also @ 175HP setting I have snapped 2 sets of gears. I learned after the 2nd set not to do a hard launch with a full bottle that stuck in the shower under the hot water to bring it to a temp of about 110 degrees !!! LOL( pressure must have been over 1000 PSI) Ill tell you what That was the fastest I have ever felt that baby move. I mean I absolutly obliterated a porsche, and modded mustang cobra and a Audi s4 turbo that was modified( I could hear that big ole aftermarket turbo wastegate slammin between shifts)Just to get an idea how fast the Audi s4 was it killed the cobra and porsche. I used up the rest of the bottle the same night playing with a few other F-bodies and a vette. The next day I went to drive to Boca Raton and got on the interstate and I noticed a strange noise coming from the rear, well on the way back home it got much worse. After putting the car on the lift
i found teeth had been shredded off my pinion....So in short...Becareful how much you spray. I know you say you only want a 75HP shot now...well so did I, now its at 175 !!! and in teh shop having a 383 stroker put in

Good Luck
Once again I vote for HOLLEY NOS brand
TriPinTaZ is offline  
Old 12-31-2002, 12:30 AM
  #3  
Registered User
Thread Starter
 
94ZRiCeKiLr's Avatar
 
Join Date: Dec 2002
Posts: 821
thanx for the info man
94ZRiCeKiLr is offline  
Old 01-02-2003, 11:24 AM
  #4  
Registered User
 
gb95zconv's Avatar
 
Join Date: Jul 2000
Location: Woodstock,Georgia
Posts: 1,428
Do a search in the N2O section and youll find alot of info on this subject.......Like was said before NX is the preferred for various reasons.
gb95zconv is offline  
Old 01-02-2003, 11:42 AM
  #5  
Moderator
 
rskrause's Avatar
 
Join Date: Dec 1969
Location: Buffalo, New York
Posts: 10,745
NX wet kit.

Rich Krause
rskrause is offline  
Old 01-03-2003, 09:13 PM
  #6  
Registered User
 
TriPinTaZ's Avatar
 
Join Date: Dec 2002
Posts: 752
NOS!
TriPinTaZ is offline  
Old 01-03-2003, 10:24 PM
  #7  
Registered User
 
BottleFed94Z's Avatar
 
Join Date: May 2002
Location: CO
Posts: 86
NX all the way.
BottleFed94Z is offline  
Old 01-03-2003, 10:32 PM
  #8  
Registered User
 
BottleFed94Z's Avatar
 
Join Date: May 2002
Location: CO
Posts: 86
Originally posted by 94ZRiCeKiLr
thanx for the info man
Hey how much did those Vortec Z rims cost you? I have a set of original GM ZR-1 -SS style17 x9's. I'm thinking of selling mine and getting a set of Vortec Z's. Except I heard they were kinda heavy.
BottleFed94Z is offline  
Old 01-04-2003, 05:17 PM
  #9  
Registered User
Thread Starter
 
94ZRiCeKiLr's Avatar
 
Join Date: Dec 2002
Posts: 821
i work for a parts dealer in queens so we became a dealer for performance wheel outlet for one set of wheels lol. i got the dealer price which was $780....i think the 17" in chrome would cost about $1050 shipped regular price (estimation).
94ZRiCeKiLr is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
D1SC383LT4
Parts For Sale
4
01-01-2016 01:56 PM
PFYC
Supporting Vendor Group Purchases and Sales
0
01-23-2015 01:13 PM
CARiD
Supporting Vendor Group Purchases and Sales
0
01-14-2015 04:00 AM
CARiD
Supporting Vendor Group Purchases and Sales
0
12-26-2014 04:20 AM
PFYC
Supporting Vendor Group Purchases and Sales
0
12-04-2014 11:56 AM



Quick Reply: need kit for stocker LT1



All times are GMT -5. The time now is 06:53 AM.