N2O Tech Discussion for the use of Nitrous Oxide

MSD6AL and window switch

Old Jul 5, 2002 | 11:57 PM
  #1  
z2894convertible's Avatar
Thread Starter
Registered User
 
Joined: Sep 2001
Posts: 223
From: Winnsboro, Tx
Post MSD6AL and window switch

Do I need a window switch if I get a MSD6AL for rpm settings for the n2o???
Old Jul 6, 2002 | 04:19 PM
  #2  
n2oTransAmLT1's Avatar
Registered User
 
Joined: Jun 2002
Posts: 117
From: Washington, PA
Post

Yes. You will need the window switch if you want to turn nitrous off after a certain RPM, in case you miss a shift. MSD6al wont do that for you.

------------------
`96 TransAm: RamAir w/ K&N filter, 125hp Zex dry kit, 3.73 gears, McLeod StreetTwin clutch, Borla cat-back, 1le alum. driveshaft, B&M shifter, Walbro in-line fuel booster pump, Granatelli MAF, 52mm TB w/Airfoil and coolent bypass, LT4 KM + programmed computer, Accel 8.8 race wires, Zex Hyperformance plugs, MSD Univ. Adj. timing, Window switch, Sport-comp Nitrous, Boost, Fuel pressure gauges in center 3 vents and Air/Fuel gauge on A-pillar pod, Mobil 1 only, !CAGS, Yokohama tires, tinted windows.

Low 13's on motor.
Low 12's on bottle.
"Lots of throttle and a backup bottle"
Old Jul 6, 2002 | 07:07 PM
  #3  
mtxpert's Avatar
Registered User
 
Joined: Oct 2001
Posts: 312
From: Phoenix, AZ USA
Thumbs up

Forget the MSD, get a Mallory VI part # 685 which includes a programmable digital window switch, timing retard and 2 stage rev limiter. $219.99 at summitracing.com

Just FYI,
Mike
Old Jul 7, 2002 | 08:51 PM
  #4  
donot_4get's Avatar
Registered User
 
Joined: Aug 2001
Posts: 330
From: Delaware
Post

<font face="Verdana, Arial" size="2">Originally posted by mtxpert:
Forget the MSD, get a Mallory VI part # 685 which includes a programmable digital window switch, timing retard and 2 stage rev limiter. $219.99 at summitracing.com

Just FYI,
Mike
</font>

Are they any good compare to MSD?? Every body seen to buy MSD

thanks
leo
------------------
1993 Z-28
13.7s@99.97mph
SS hood
Rockford: amps, and sub
Cadence: EQ, and CAP 1.0
BM Quart: components
Pioneer: Head Unit
100% self-install
http://www.tereschubert.com/camaro

[This message has been edited by donot_4get (edited July 07, 2002).]
Old Jul 10, 2002 | 03:05 PM
  #5  
rpm4lalo's Avatar
Registered User
 
Joined: Sep 2001
Posts: 725
From: Zip Tie Island
Question

<font face="Verdana, Arial" size="2">Forget the MSD, get a Mallory VI part # 685 which includes a programmable digital window switch, timing retard and 2 stage rev limiter. $219.99 at summitracing.com</font>
It say it is out of stock and I can't seem to get a decription of it from Summit.

[This message has been edited by rpm4lalo (edited July 10, 2002).]
Old Jul 10, 2002 | 05:25 PM
  #6  
z2894convertible's Avatar
Thread Starter
Registered User
 
Joined: Sep 2001
Posts: 223
From: Winnsboro, Tx
Post

I looked for it also and I couldn`t find it.
Old Jul 10, 2002 | 07:16 PM
  #7  
mtxpert's Avatar
Registered User
 
Joined: Oct 2001
Posts: 312
From: Phoenix, AZ USA
Post

Jegs:
http://www.jegs.com/cgi-bin/ncommerc...34&prmenbr=361
Century Performance
http://www.centuryperformance.com/de...uct_ID=MAL-685
Old Jul 10, 2002 | 07:25 PM
  #8  
mtxpert's Avatar
Registered User
 
Joined: Oct 2001
Posts: 312
From: Phoenix, AZ USA
Post

Jegs:
http://www.jegs.com/cgi-bin/ncommerc...34&prmenbr=361
Century Performance:
http://www.centuryperformance.com/de...uct_ID=MAL-685
Old Jul 10, 2002 | 07:29 PM
  #9  
mtxpert's Avatar
Registered User
 
Joined: Oct 2001
Posts: 312
From: Phoenix, AZ USA
Post

Here you go:
http://www.centuryperformance.com/mallory/index.asp

http://www.jegs.com/cgi-bin/ncommerc...34&prmenbr=361
Old Jul 10, 2002 | 07:30 PM
  #10  
mtxpert's Avatar
Registered User
 
Joined: Oct 2001
Posts: 312
From: Phoenix, AZ USA
Post

I can't post the links on here for some reason
Go to jegs and on the top put in 685 - click on the link for the Mallory VI CD ignition

Also look on the web for 685 and Century Performance

Mike
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
IndyZman
Cars For Sale
3
Oct 22, 2015 02:17 PM
94Z28LS1toLT1
General 1967-2002 F-Body Tech
4
Sep 22, 2015 05:24 PM
Rod Bender
Fuel and Ignition
25
Sep 16, 2015 01:47 PM
jackpawt883
LT1 Based Engine Tech
7
Sep 10, 2015 08:53 PM
z28cam1993
General 1967-2002 F-Body Tech
14
Sep 9, 2015 04:08 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:17 AM.