N2O Tech Discussion for the use of Nitrous Oxide

fuel pressure safety switch question

Thread Tools
 
Search this Thread
 
Old Nov 1, 2003 | 09:48 PM
  #1  
93m6's Avatar
Thread Starter
Registered User
 
Joined: Jan 2002
Posts: 141
From: kansas
Angry fuel pressure safety switch question

what do u guys have your fpss set at. I set mine at 40 psi and was running what everyone else is running there's at?
Old Nov 2, 2003 | 12:31 AM
  #2  
RacinLT1's Avatar
Registered User
 
Joined: Oct 2000
Posts: 1,620
From: Dover DE
i dont use 1,havent used a fpss in 8 years. never had any luck with 1,always cut on/off no matter what we did,so i just gave up on em.
Old Nov 2, 2003 | 08:37 AM
  #3  
GJE94Z28's Avatar
Registered User
 
Joined: Dec 1969
Posts: 89
From: Granger,IN. USA
I agree with RacinLT1, mine did the same thing. Just make sure you have a good fuel pump.
Old Nov 2, 2003 | 09:58 PM
  #4  
93m6's Avatar
Thread Starter
Registered User
 
Joined: Jan 2002
Posts: 141
From: kansas
the reason i ask is I just installed one on my car and now my nitrous doesn't work. My car was surging when i ran my last bottle at the track. It was about 50 degrees outside and my bottle pressure was around 750-800 psi with a full bottle I just replaced my fuel pump this month and also installed a bottle heater this weekend. i guess i'll bypass the fpss and give it another shot.
Old Nov 3, 2003 | 05:39 PM
  #5  
funina91ss's Avatar
Registered User
 
Joined: Apr 2001
Posts: 1,331
From: Huntington,WV
surging is the reason I took mine off too. I have had it off for about 8mths.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
DirtyDaveW
Forced Induction
13
Dec 1, 2016 05:37 PM
Alex Barnes
LT1 Based Engine Tech
16
Jan 24, 2015 10:21 PM
nophix
Fuel and Ignition
3
Nov 30, 2014 10:26 PM
chevroletfreak
LT1 Based Engine Tech
202
Jul 4, 2005 05:00 PM
F(ast)-body
LT1 Based Engine Tech
8
Feb 26, 2003 09:05 AM




All times are GMT -5. The time now is 04:55 AM.