I have my heads being ported right now. I also have a NX nitrous kit and was thinking of running a 75 shot. When I sent my heads to be ported we noticed that they were a little warped, so i also got them milled 0.10. I have Felpro Gasket p/n 1074. Now my compression should go up a bit. I think to 11:1. Now my real question is it ok to run a 75 shot with 11:1 compression on a stock bottom end? I am kind of new to all this stuff and would apprieciate any info.



Thanx
Jim

 

Sure,you can run a 150 shot. It's all a matter of fuel and timing manipulation.

Stock is 10.5:1 and i spray mine with a 150 no problems.

 

Thanx for the info.................