need tpi intake
09-16-2004, 12:38 PM
#1
Registered User
Thread Starter
Join Date: Nov 2000
Location: MI
Posts: 3,978
need tpi intake
anyone have or have access to say at a yard for a late 80 early 90 iroc/z28/vette tpi factory intake?
i need the base, runners and plenum along with rails if possible. don't care about condition so long as the runners aren't smashed in and it's fairly cheap.
Q your good at the yards, if you see anything please let me know!
i need the base, runners and plenum along with rails if possible. don't care about condition so long as the runners aren't smashed in and it's fairly cheap.
Q your good at the yards, if you see anything please let me know!
09-16-2004, 03:42 PM
#2
Registered User
Join Date: Dec 1998
Location: Haslett, Michigan
Posts: 2,161
Re: need tpi intake
I've got a base, plenum, 48mm throttle body, and rails sitting here. The plenum is from a 1985 application but it will work. Fuel rail is also a cold start injector rail so the end needs to be brazed shut.
All new gaskets, but no runners. I can port the plenum for you if you want.
Make offer?
All new gaskets, but no runners. I can port the plenum for you if you want.
Make offer?
09-18-2004, 01:53 PM
#4
Registered User
Thread Starter
Join Date: Nov 2000
Location: MI
Posts: 3,978
Re: need tpi intake
come on guys, no one can get ahold of a cheap set of runners and plenum for me???
local yards want 50-75 for runners, plenum and rails. i'll spend up to 100. let me know if something comes up.
local yards want 50-75 for runners, plenum and rails. i'll spend up to 100. let me know if something comes up.
Thread
Thread Starter
Forum
Replies
Last Post
chevroletfreak
LT1 Based Engine Tech
202
07-04-2005 05:00 PM