headers,true duals,mufflers+more
07-05-2008, 06:53 PM
#1
Registered User
Thread Starter
Join Date: Apr 2006
Location: michigan
Posts: 152
headers,true duals,mufflers+more
hooker super comp 1 3/4 long tubes have a little over 800 miles $250
will include a y pipe for those header for $50 3in ORY
2 spintech 3in race mufflers $100
ls1 e-brake cables like new $25
sometimes i dont get thread replys right away so my email is thesynster@yahoo.com
will include a y pipe for those header for $50 3in ORY
2 spintech 3in race mufflers $100
ls1 e-brake cables like new $25
sometimes i dont get thread replys right away so my email is thesynster@yahoo.com
Last edited by Syn; 07-22-2008 at 01:53 AM.
07-08-2008, 06:24 PM
#6
Registered User
Join Date: Jun 2001
Location: waterford, MI - USA
Posts: 3,738
ok, someone get some pics and post them. would love to see them. wish I had something to put them on. 
maybe I could talk my dad into picking them up off ya for his TA. how is the clearance around the rearend and panhard bar? both over the pass. side or one over each side?
who made the duals?
maybe I could talk my dad into picking them up off ya for his TA. how is the clearance around the rearend and panhard bar? both over the pass. side or one over each side? who made the duals?
07-08-2008, 06:33 PM
#7
Registered User
Thread Starter
Join Date: Apr 2006
Location: michigan
Posts: 152
duals are 99% sold got a guy comeing tomorrow with either full payment or a down payment he said lol
the duals went over the pass side axle im lowered so i had to use a panhard relocation kit but at first i just removed the upper brace, stock height it might clear tho.
i made them, ive built all of my exhuast setups 3 true duals 2 over the axle, one dumped setup, a 3in y pipe setup and a 4in setup now. i changed alot of my suspension so my exhaust has changed alot too lol
clearence with the prokit was pretty good, the pipes were flattened up front not dented,had about a pop can everything tucked up nice, i flipped the driveshaft saftey loop around and added some washers and it cleared that
thought id give a description incase the sale falls threw
the duals went over the pass side axle im lowered so i had to use a panhard relocation kit but at first i just removed the upper brace, stock height it might clear tho.
i made them, ive built all of my exhuast setups 3 true duals 2 over the axle, one dumped setup, a 3in y pipe setup and a 4in setup now. i changed alot of my suspension so my exhaust has changed alot too lol
clearence with the prokit was pretty good, the pipes were flattened up front not dented,had about a pop can everything tucked up nice, i flipped the driveshaft saftey loop around and added some washers and it cleared that
thought id give a description incase the sale falls threw
Thread
Thread Starter
Forum
Replies
Last Post
