Midwest Illinois, Indiana, Michigan, Ohio, and Wisconsin

Guns For Sale: Skeet Gun & Rifle

Thread Tools
 
Search this Thread
 
Old Dec 7, 2008 | 03:37 PM
  #1  
Bill'sWS6's Avatar
Thread Starter
Registered User
 
Joined: May 2000
Posts: 833
From: Ann Arbor, MI
Guns For Sale: Skeet Gun & Rifle

I'm posting 2 guns that I have up for sale:

1.)Beretta A303, RH, 12ga, autoloader. Special Skeet edition with European walnut stock. The quality of the wood and finish can be mistaken for a grade 6 a very beautiful gun!
Asking $800 OBO. For pictures or additional information michael.provenzano@wowway.com or call 734.308.6369

2.) Marlin 30/30 Rifle with scope (Bushnell 4x32 Sportview), case and sling. This gun is near perfect, no scratches etc.
Asking $275 OBO. For pictures or additional information michael.provenzano@wowway.com or call 734.308.6369

Located In Canton

Thanks,

Last edited by Bill'sWS6; Dec 7, 2008 at 04:14 PM. Reason: more info
Old Dec 9, 2008 | 05:17 PM
  #2  
rod442's Avatar
Registered User
 
Joined: Dec 1969
Posts: 385
From: Ypsilanti, MI
Lever action Marlin? I know someone that might be interested.

Send me some pics: Rod_442@comcast.net

and how u doing BTW?
Old Dec 9, 2008 | 06:42 PM
  #3  
AL SS590 M6's Avatar
Moderator
 
Joined: Jul 1998
Posts: 6,247
From: Charlotte,MI USA
Originally Posted by rod442
Lever action Marlin? I know someone that might be interested.

Send me some pics: Rod_442@comcast.net

and how u doing BTW?
If your thinking of me Rod, I've got two of them already.
Old Dec 9, 2008 | 08:29 PM
  #4  
Bill'sWS6's Avatar
Thread Starter
Registered User
 
Joined: May 2000
Posts: 833
From: Ann Arbor, MI
Originally Posted by rod442
Lever action Marlin? I know someone that might be interested.

Send me some pics: Rod_442@comcast.net

and how u doing BTW?

Well, if it isn't for Al then I will get some more pics for you ASAP.

I am doing okay. Not much going on with the weather like this. I am getting ready to start a new project car:

2000-2002 Vette (auto)

Forged 347

Single Turbo or Procharger (haven't decided what system to get?) 12psi

Ford 9" with 2:73 gears (yes, 2:73) I need to save money some how on this project, gas in this case. I would imagine I could see 32ish on the freeway with this setup

4 Point Cage

Harness Setup

Oh yea, a nice tranny too with a 3400 stall.

I would hope to see 575rwhp out of this setup?

How about you, what have you been up to? Did you get your motor fixed?

Take Care,
Old Dec 9, 2008 | 08:32 PM
  #5  
Bill'sWS6's Avatar
Thread Starter
Registered User
 
Joined: May 2000
Posts: 833
From: Ann Arbor, MI
Originally Posted by AL SS590 M6
If your thinking of me Rod, I've got two of them already.
Hey Al, congrats on breaking into the 10's!

What is your next mod? A nice 75 shot would be nice, and safe too.

Later,
Old Dec 9, 2008 | 10:22 PM
  #6  
rod442's Avatar
Registered User
 
Joined: Dec 1969
Posts: 385
From: Ypsilanti, MI
It was info for you Al, but I didn't remember what cal's you might still looking for.

Motor's still the same. Work and anything I can find to keep busy is what ive been up to.

Let me know if I can help with anything. I would say a turbo would be easier to meet your goals. maybe even cheaper by a little. To run 12psi on a forged motor, I'd def look into meth injection or somehting, 9-10psi is about the max Ive been able to run on 93. and even when its really hot out I was a little less.

and dont be too certain you need to upgrade the rear, I'd see what a lot of the vette guys are doing. I know they can make pretty good power through a stockish rear.

and I dont doubt you'd see those power levels with the right setup, maybe a little less. mid 500's. a 9" + blower combo will use more power than a turbo + stock irs before it hits the tires.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cmsmith
2016+ Camaro News, Sightings, Pictures, and General Discussion
7
Sep 14, 2015 09:25 PM
damnyankee36
LS1 Based Engine Tech
5
Sep 9, 2015 07:06 PM
Scottyboy
Fuel and Ignition
1
Feb 11, 2015 10:28 PM
Hurin
Suspension, Chassis, and Brakes
4
Dec 13, 2014 07:38 PM
ZYA_LTR
Midwest
0
Jan 3, 2003 05:42 PM




All times are GMT -5. The time now is 11:29 PM.