I am selling the 355 that I had in my 1985 vette, it is a 2-bolt main block which was bored .030 over with .030 pistons in it, crank was ground .010 under, it was rebuilt this way when I got it and the motor has 20k miles on it, it could use some new main bearings but otherwise is in great shape. It has a 210/216 cam and the oil pump and timing chain also have 20k miles on them. the heads are stock L98 corvette heads (cast iron) they had the springs and valves replaced but the valve seats probably need to be redone, the rocker arms and pushrods and such are also included as well as the oil pan and flexplate. I have the heads and cam out of it now because I was going to put a different cam and heads on it but I went with a whole other engine instead.
$300 for everything.