Is this worth it /STB
Is this worth it /STB
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2453204468
I dont have a drag car. This is my daily driver for now and if I keep it; it will be restored as a street performer and garged kept.
I dont have a drag car. This is my daily driver for now and if I keep it; it will be restored as a street performer and garged kept.
As stated, you get what you pay for. My first shot at a STB was a single tube, much like the one here. If you take corners hard it might bend. I would be curious why it says at the top "excluding LT1 and SS models", and at the bottom "made for V8....". These two statements seem to contradict each other. I now have a Hotchkis STB, works wonders for cornering. Again, you could very well get what you pay for.
....I checked it out and it does seem like a low price. They also had Long Tube headers for $409, which is the same price as Hookers.... It seems as if a STB would be REALLY easy to fabricate yourself, doesn't it? Probably the easiest thing on a car to fab.... Bill....
Originally posted by webbicle
I would be curious why it says at the top "excluding LT1 and SS models", and at the bottom "made for V8....". These two statements seem to contradict each other. .
I would be curious why it says at the top "excluding LT1 and SS models", and at the bottom "made for V8....". These two statements seem to contradict each other. .
Im not cornering that hard I just want my car firm and tight and cheap as I can get it done. I really think that some parts are really over priced and a bar called a STB is one of those. I feel that over $50 is really to much.
I went to a local machine shop and they can make me one for $40 any design I want but they need one to take measures from one to get it to fit right. Im gonna buy this one and try it out and if it bends take it to the machine shop and let them stiffen it up.
Thread
Thread Starter
Forum
Replies
Last Post
colts0455
LT1 Based Engine Tech
18
Sep 2, 2015 12:41 PM
mark0006
General 1967-2002 F-Body Tech
1
Aug 29, 2015 09:45 AM



