LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

wire harness removal

Thread Tools
 
Search this Thread
 
Old Dec 14, 2007 | 09:43 AM
  #1  
steve40's Avatar
Thread Starter
Registered User
 
Joined: Nov 2002
Posts: 496
From: windsor,on
wire harness removal

i sold my lt1 and swapping to a ls based motor. i was removing the harness last night and found that it goes thru the firewall under the pcm. any idea where those connections are?
Old Dec 14, 2007 | 09:55 AM
  #2  
shoebox's Avatar
Registered User
 
Joined: Dec 1969
Posts: 27,725
From: Little Rock, AR
They are right on the other side of the firewall in the RH kick panel.

http://shbox.com/1/keyless_entry.jpg

(96-97 does not have the keyless entry receiver, but the other connections are there)
Old Dec 14, 2007 | 09:56 AM
  #3  
steve40's Avatar
Thread Starter
Registered User
 
Joined: Nov 2002
Posts: 496
From: windsor,on
sweet...thanks....i was hoping that i didn't have to pull a lot of the dash apart
Old Jul 21, 2009 | 01:41 PM
  #4  
qnitro's Avatar
Registered User
 
Joined: Jan 2009
Posts: 100
So the 1997 and 1996 dont have a keyless receiver?? What did they use??
Old Jul 21, 2009 | 04:50 PM
  #5  
shoebox's Avatar
Registered User
 
Joined: Dec 1969
Posts: 27,725
From: Little Rock, AR
Originally Posted by qnitro
So the 1997 and 1996 dont have a keyless receiver?? What did they use??
Keyless entry was integrated into the BCM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
chevroletfreak
LT1 Based Engine Tech
202
Jul 4, 2005 05:00 PM
gh0st
Car Audio and Electronics
5
Sep 1, 2002 10:24 AM
Teal94V-6
Car Audio and Electronics
3
Aug 31, 2002 09:21 PM
yosshimura
Car Audio and Electronics
3
Aug 14, 2002 07:29 PM




All times are GMT -5. The time now is 11:20 PM.