im new to this site my z has a 110mph speedo and i dont understand why it came with this from the factory can anyone clear this up for me and how hard is it to install the white face gauges? and how do i check my replies when i put out a thread,like i said im new

 

Do you know if you car has the 110 rev limiter? If so thats nothing that some computer programming cant change.

I have the white face guages on my car. It probably took me about an 1hr to install. I did eveything myself. I believe I paid about $150 for mine.

You should be notified when you check your email that you have a new message here at CAMAROZ28.com. Welcome to the board!!!

 

Some cars came with the 110 speedo. The white faced gagues wasa factory option that you could put on your car.

 

I wish my car had came with the white face gauges stock. I have to get some aftermarket ones for mine.

 

I got some for $36 shipped

I bet it will be a lot of fun putting them in

 

There really not that bad. Just make sure you mark where your needles sit and put them back EXACTLY where they are. Thats the hard part. Good luck.

 

Try this site out. You don't have to remove the needles when you install them. and you have a choice of six different color ranges of green or blue. www.streetracerparts.com

 

You car came with the 110 speedo b/c it was an option to get the 150mph speedo with z rated tires.

As for putting in the new gauges, just get overlays so you dont have to mess with setting the needles. Everything else is pretty easy, just take your time. It took me about 4 hours first time and i didnt have a clue what i was doing. I just started taking stuff apart, lol.

 

In the link is a pic of my BBK white faced speedo, I like very much!

http://www.worldisround.com/photos/264/430.jpg

here is a pic of the odometer and fuel and temp guages.

I highly recommend BBK's they can be gotten outta summit.

http://www.worldisround.com/photos/264/428.jpg

 

hey ibanez , where did u get those from,,, also ive heard that there are two types , the ones that have adhesive on the back, and the ones that are made of plastic , which ones look better and which are easiest to install?

 

S-R motorsports

blue/green/white during day
http://bealer.org/whitegauge.jpg

http://bealer.org/bluegauge.jpg

 

I got mine off of eBay...which reminds me I should probably send that money order out for them