Where to get rubber motor mounts?
Registered User
Joined: Mar 1999
Posts: 455
From: Syracuse, NY
Try Dal :
Dal Slabaugh
Manager, Internet Sales
Van Devere Oldsmobile
300 W. Market Street
Akron, OH 44303
Toll Free 1-877-448-5451
8 AM - 5 PM
Fax: 1-330-658-4065
E-Mail: lockitup@bright.net
he should be able to beat dealer price by a bit...
I order all of my OEM parts through him through the years, with nothing but praise for his help and service.
Dal Slabaugh
Manager, Internet Sales
Van Devere Oldsmobile
300 W. Market Street
Akron, OH 44303
Toll Free 1-877-448-5451
8 AM - 5 PM
Fax: 1-330-658-4065
E-Mail: lockitup@bright.net
he should be able to beat dealer price by a bit...
I order all of my OEM parts through him through the years, with nothing but praise for his help and service.
Thread Starter
Registered User
Joined: Aug 2005
Posts: 4,405
From: Kantuckee Yo'
Someone help me here.
I bought a standard SBC right side rubber motor mount for $8.00 but obviously it wont fit like the LT1 motor mount is supposed to. The rubber piece inside this standard mounts looks identical to the one in the LT1 mount.
I think I can open the shell on the standard mount, get the rubber and put it in my LT1 shell. This would reduce the cost of the replacement from $90 to less than $10.00.
Does this sound possbile and has anyone done this?
I then want to see the rubber out of an LS1 mount, it may be similar to the left side LT1 mount. It sure appears so from a simple picture. I dont know what the price is of a LS1 mount so I might be better off just sticking to the right side mount.
What do you guys think?
I bought a standard SBC right side rubber motor mount for $8.00 but obviously it wont fit like the LT1 motor mount is supposed to. The rubber piece inside this standard mounts looks identical to the one in the LT1 mount.
I think I can open the shell on the standard mount, get the rubber and put it in my LT1 shell. This would reduce the cost of the replacement from $90 to less than $10.00.
Does this sound possbile and has anyone done this?
I then want to see the rubber out of an LS1 mount, it may be similar to the left side LT1 mount. It sure appears so from a simple picture. I dont know what the price is of a LS1 mount so I might be better off just sticking to the right side mount.
What do you guys think?
Thread Starter
Registered User
Joined: Aug 2005
Posts: 4,405
From: Kantuckee Yo'
Update,
Got the rubber ones back in and I like it a whole lot better just like stock, however I can feel the cam a tad. That wicked vibe when the motor is running is gone. If this were a race car I would have kept the poly mounts.
I bought a STD SBC motor mount for $10.00, drilled the rivets and removed the rubber and installed in my LT1 right side mount shell. The rubbers are the same and this saved a lot of money.
Got the rubber ones back in and I like it a whole lot better just like stock, however I can feel the cam a tad. That wicked vibe when the motor is running is gone. If this were a race car I would have kept the poly mounts.
I bought a STD SBC motor mount for $10.00, drilled the rivets and removed the rubber and installed in my LT1 right side mount shell. The rubbers are the same and this saved a lot of money.
Thread
Thread Starter
Forum
Replies
Last Post
