I have a 97 Formula 6speed w/ 3.42 gears. It has mildly ported heads a comp xe 224/230 112LSA cam, Jet-Hot LT headers, K&N CAI, 85MM MAF, Port matched intake and full exhaust with a cutout. What does everybody think I'll be in the range of with decent traction. Car went 13.9 @ 104.4 basically stock with a crappy 2.3 60'

 

just get some drag radials, tuning and run a mid 12 like i told ya

 

with traction, i would say at least mid 12s. low 12s are definatly within reach.

good luck!



jon

 

Haha I was just hoping someon had the same setup Trey some guy on LS1tech said he was ruinning an 11.9 on it but I didnt think It could be that much considering his car is 3600lbs which is at least 200 over mine

 

take the sand bags out of the trunk
a 3800 lb f-bod is one fat bitch

 

I'm surprised Trey didn't tell you how he thinks you can hit under 12s....

You have a ton of speed work, and no suspension from what I can tell. You need traction and cut down that 60'? Get some suspension stuff and that'll cut down a ton!

 

Oh yeah I also have rear LCAs and was planning on getting SFCs and torque arm. Also Ill be running on some bfg drag radials. Hoping to cut at least a 1.8..

 

ttt anyone have a similar setup so far sounds bout right though

 

11's will be rough, especailly with a 6spd

hooking on a 6spd is hard


12.2-12.6 is my guess