What Mods Do I Need To Take This Modded LS1?
Originally posted by Z95m6
I thought LS1 heads only flow like 250ish on intake which a decent ported LT1 head should match that or surpass it pretty easy. So i would think if you had decent heads and a cam comparable to what she has i think you would be even.
I thought LS1 heads only flow like 250ish on intake which a decent ported LT1 head should match that or surpass it pretty easy. So i would think if you had decent heads and a cam comparable to what she has i think you would be even.
Yes LS1's are defiently bad to the bone.
Like many said your easiest and cheeper bet is to stop fighting and join them, buuuuuuutt I am not going to do this and I see more fun in out running someone in a much slower car from the factory.
I would say a good set of ported heads and a big cam with macthing intake and all the bolt ons with a big stall. This would get you very close and just to top it off a superchrager or nitrous would put the nails in the coffin. I dynoed 460.6rwhp today with the above set up but nitrous not the superchager. I hope to be in the 10's for this coming SLP day.
Like many said your easiest and cheeper bet is to stop fighting and join them, buuuuuuutt I am not going to do this and I see more fun in out running someone in a much slower car from the factory.
I would say a good set of ported heads and a big cam with macthing intake and all the bolt ons with a big stall. This would get you very close and just to top it off a superchrager or nitrous would put the nails in the coffin. I dynoed 460.6rwhp today with the above set up but nitrous not the superchager. I hope to be in the 10's for this coming SLP day.
last time I went to the track I lined up next to a 02 WS6. My reaction time was 4 tenths faster than his, but he still took me by the sixty foot.....by the end of the quarter he had about 2.5-3 carlengths on me
Registered User
Joined: Oct 2000
Posts: 440
From: Albuquerque,NM--5,600 feet above you sea-level cats
You could put a bad *** solid roller 396 in and stomp the sht out of her, unless she us evenly matched in the CID deparment than all bets are off. You just can't beat the LS1 head design.
I don't know why you guys think that LS1 would be impossible to beat. I am getting my heads just mildly ported to 260ish cfms so that would be equal or a tad better than LS1's. So I would think if he would get his heads done like that and a cam equal to or better than hers he will be right with her. LLoyd will port heads for close to 500 that is a cheap way to catch up to LS1's.
hey bad93z, you live in mt olive or litchfield? i am right south of you in staunton. i actually go to litchfield and cruise around sometimes on the weekends. i was there this last friday night.
Thread
Thread Starter
Forum
Replies
Last Post
CARiD
2010 - 2015 Camaro Interior, Exterior, Paint & Body, Electronics/Car Audio
0
Jul 7, 2015 08:19 AM



