were can i get a crank
Registered User
Joined: Jul 2002
Posts: 3,768
From: Friendswood, TX, USA
Re: were can i get a crank
Registered User
Joined: Dec 2003
Posts: 2,724
From: Oklahoma where trees are made of wood.
Re: were can i get a crank
Any 1 peice rear main seal 3.75 stroke crank will work, heed their rod recomendation (length) for the crank.
I have used the Eagle and scat 9000 cast steel cranks in my LT1, both balanced very cheaply.
I have used the Eagle and scat 9000 cast steel cranks in my LT1, both balanced very cheaply.
Registered User
Joined: Jun 2005
Posts: 1,729
From: Eastpointe,Michigan
Registered User
Joined: Jan 2006
Posts: 1,127
From: Dallas, TX
Re: were can i get a crank
#1 place www.summitracing.com free 1-2 day shipping and the lowest prices, not even ebay can beat them, I just built my 383 from there.
Registered User
Joined: Mar 2006
Posts: 47
From: N. Ky.
Re: were can i get a crank
Go here: http://www.ohiocrank.com/sbcCranks.html
They've got 4340 cranks for $445 for what you need. Their lightweight cranks are less than anyone else I've priced for a regular unit. They can probably put together a balanced rotating assembly for a couple hun less than elsewhere too.
They've got 4340 cranks for $445 for what you need. Their lightweight cranks are less than anyone else I've priced for a regular unit. They can probably put together a balanced rotating assembly for a couple hun less than elsewhere too.
Last edited by 67ProStreet502; Apr 13, 2006 at 10:34 PM.
Registered User
Joined: Mar 2006
Posts: 47
From: N. Ky.
Re: were can i get a crank
Originally Posted by Mike96z
#1 place www.summitracing.com free 1-2 day shipping and the lowest prices, not even ebay can beat them, I just built my 383 from there.
Thread
Thread Starter
Forum
Replies
Last Post
68camaroboltz
General 1967-2002 F-Body Tech
3
Oct 5, 2015 11:56 PM
Ryan Ramsaran
LT1 Based Engine Tech
3
Sep 19, 2015 08:43 PM
