LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

Weird bump when tranny shifts at redline

Thread Tools
 
Search this Thread
 
Old Sep 28, 2003 | 12:16 PM
  #1  
97droptopZ's Avatar
Thread Starter
Registered User
 
Joined: Jan 2003
Posts: 252
From: Louisiana
Exclamation Weird bump when tranny shifts at redline

Last night I was driving around town and I raced some mustang and beat him but thats not the point. The point is that when it redlined between first and second and the tranny shifted it felt like something hit the undercarraige right below the center console. Also, when i am going slow something rattles pretty bad but i think it is my y pipe connection to the rest of my exhaust coming loose because i didnt tighten it enough and my cutout makes it come loose. I also noticed that there was a leak under there after the y pipe, there was a little carbon build up. could the first thing be the y pipe connection also?
Old Sep 28, 2003 | 12:28 PM
  #2  
ead94z28's Avatar
Registered User
 
Joined: Aug 2003
Posts: 450
From: Maryland
I would check tranny mount.
Old Sep 28, 2003 | 12:33 PM
  #3  
kmook's Avatar
Advanced Tech Moderator
 
Joined: Aug 2001
Posts: 2,262
From: Nashville
^^^ Bingo. That is most likely it.

Only other thing it might be (unlikely but it happened to me once) is the actual torque arm broke and was hitting the driveshaft tunnel.
Old Sep 28, 2003 | 12:38 PM
  #4  
Hyperspeed97z28's Avatar
Registered User
 
Joined: Dec 2001
Posts: 3,615
From: Upstate, NY (Albany area)
Sounds to me like your tranny mount broke....

Go to autozone/advance/napa.. Tell em you need a new tranny mount for a 2002 Z/28 although I think they are all 1LE spec now...
Old Sep 28, 2003 | 12:58 PM
  #5  
94z28blue's Avatar
Registered User
 
Joined: Apr 2003
Posts: 171
From: california
sounds like a tranny mount, ive gone through 3
Old Sep 28, 2003 | 01:08 PM
  #6  
97droptopZ's Avatar
Thread Starter
Registered User
 
Joined: Jan 2003
Posts: 252
From: Louisiana
how hard is it to change? anybody wanna tell me how to do it and where to locate it?
Old Sep 28, 2003 | 02:58 PM
  #7  
97droptopZ's Avatar
Thread Starter
Registered User
 
Joined: Jan 2003
Posts: 252
From: Louisiana
looks like the tranny mount is bad. i got a new polyurethane one from autozone and im in the process of installing it. my jack wont fit between the crossbrace to jack up the tranny so im taking it off. with this off and the mount not supporting it will the tranny mess up?
Old Sep 28, 2003 | 04:23 PM
  #8  
kingman109's Avatar
Registered User
 
Joined: Aug 2001
Posts: 1,428
From: Boulder, CO -
gone through 2 .... easy to change out luckily but annoying as hell
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dylan1303
Cars For Sale
6
Aug 12, 2015 02:00 AM
dylan1303
Forced Induction
5
May 22, 2015 12:24 PM
BigWil
LT1 Based Engine Tech
12
Mar 29, 2015 12:24 PM
97z28k&N
General 1967-2002 F-Body Tech
3
Jan 9, 2015 04:58 AM




All times are GMT -5. The time now is 11:08 AM.