What you guys think of the head work?

https://www.youtube.com/watch?v=M-x0IseVqV8

https://www.youtube.com/watch?v=k0j84l-acbs

https://www.youtube.com/watch?v=6DKSju4dyT0

https://www.youtube.com/watch?v=2dwlmDT82F8

https://www.youtube.com/watch?v=IhuWzxBmJ-8

https://www.youtube.com/watch?v=EILA27Y6tv4

https://www.youtube.com/watch?v=QTiyb5Xp73g

https://www.youtube.com/watch?v=sI2XO0NmxYE

New 4/1/13 https://www.youtube.com/watch?v=fsTCBcifd98

New 4/1/13 https://www.youtube.com/watch?v=s233UAqAagQ

New 4/2/13 https://www.youtube.com/watch?v=PPAc827t9Ls

new 4/2/13 https://www.youtube.com/watch?v=VJdsMZ6_hMY

New 4/6/13 https://www.youtube.com/watch?v=x4tU-j-SzHc (interesting info about comp valve retainers)

New 4/6/13 https://www.youtube.com/watch?v=7kTVmfeEYu4
Final results were 56.6cc on the combustion chambers 197cc on runner volume almost 200cc on the factory heads.

 

What kind of answers are you looking for?

 

Kibbles and Bits or Puppy Chow? I'm thinking Kibbles and Bits but I always like to ask.

You race down at Englishtown?

Also I know a lot of people port their own heads or like to and these videos of my heads being done might help them do so or if they please can contact him to have the work done.

 

I don't race at E-town. Atco, Maple Grove, Cecil, etc. is where I hail.

A video of a guy porting doesn't tell much in terms of the quality. Show me some CONSISTENT results with those heads, flow sheet, etc.

 

If I was racing Nascar, NHRA or Indy I would look at flow rates but for what I am going to use the car for; a weekend cruiser and once or twice at the track a year I can care less. He does guarantee the heads to flow 1-2% variation which is close enough to CnC quality. Rather then spending 3k on some aftermarket head I can have the same results for 1k, sounds like a good deal to me.

 

I liked the vids, are they making decent power?

3k for aftermarket heads?

 

80hp over stock but he also port matched and ported the intake to.

 

There just isn't enough credible information here to make any educated informed decisions.

 

My credible information is that I got $1500 dollars left in my pocket over AFR, AI, Tricks heads. Have a good day.

 

Flow numbers are great if you can relate them to many things, like....Cubic inches, vehicle weight, camshaft, carbs, intake manifold and last but certainly not least "wet flow characteristics" To put it simply, the flow bench is 1/3 of the formula, wet flow is 1/3, and Mathematics is 1/3....In reality, math is 75% of it.

So what were you looking for?

 

How do/did you substantiate this claim?

 

Thats just what I was going to ask. 80hp in what combo? Do you know what cam? Also stock bottom end? Just courious.

 

300cfm @ 28"

 

How much HP do you think a stock bottom end can handle? There is a lot of hype or should we say sales pitch.

https://www.youtube.com/watch?v=TVoh7sKxt1g

 

I know the stock bottom end can handle a lot, I wasnt trying to insult you. I was just wanted to know om more about this guys heads and what kind of set ups they were on.