Tuners! -Free Scan Log - Prior to 383 Start
Thread Starter
Registered User
Joined: May 2003
Posts: 227
Tuners! -Free Scan Log - Prior to 383 Start
Computer / Sensor Savy Gear Fiends,
http://www.filefactory.com/f/a2ead8787a77745a/
Please see the attached link to the csv file of the "Free Scan" (Data Log) of 383 with PCM Forless Tune (above). This scan was done with Motor Off / Ignition On.
I have new 52mm Professional Products TB. It looks like the TPS sensor is in good shape.
Does anything else look out of WHACK to any of you guys. It's ready to start but wanted to check this first. No trouble codes appeared either!
Does the IAC count look right?
Your input is greatly appreciated as always.
Kirk
http://www.filefactory.com/f/a2ead8787a77745a/
Please see the attached link to the csv file of the "Free Scan" (Data Log) of 383 with PCM Forless Tune (above). This scan was done with Motor Off / Ignition On.
I have new 52mm Professional Products TB. It looks like the TPS sensor is in good shape.
Does anything else look out of WHACK to any of you guys. It's ready to start but wanted to check this first. No trouble codes appeared either!
Does the IAC count look right?
Your input is greatly appreciated as always.
Kirk
Last edited by palehorse77; Mar 2, 2008 at 07:25 PM.
Administrator
Joined: Nov 1998
Posts: 71,094
From: Hell was full so they sent me to NJ
Wait 24 HOURS before pushing a post back to the top.
Please read this:
https://www.camaroz28.com/forums/lt1-based-engine-tech-9/all-members-read-abuse-%22ttt%22-5485/
I was going to take a look at the log, but I got sidetracked with this.
Please read this:
https://www.camaroz28.com/forums/lt1-based-engine-tech-9/all-members-read-abuse-%22ttt%22-5485/
I was going to take a look at the log, but I got sidetracked with this.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
PFYC
Supporting Vendor Group Purchases and Sales
0
Dec 1, 2014 08:08 AM