LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

Trouble Code Help

Old Jan 13, 2007 | 05:27 AM
  #1  
Sinister95Z's Avatar
Thread Starter
Registered User
 
Joined: Jan 2005
Posts: 683
From: Bullhead City, AZ
Trouble Code Help

I just got back from the auto part store with some rather confusing trouble codes. I hope someone can help me diagnose these issues. For reference my car is a 1995 LT1 6 speed. I appreciate any help.

11 Malfunction Indicator Lamp Fault

91 Shift Light Fault

97 4K Pulse per Mile Fault

I did recently start the car with the guage cluster removed.
Old Jan 13, 2007 | 05:56 AM
  #2  
BlackDog's Avatar
Registered User
 
Joined: Jun 2002
Posts: 660
From: LakeLand, Florida
That's why you got the codes because the cluster was removed and you started the car. The codes will go away when you put the cluster back in or disconnect the battery for 5 min.
Old Jan 13, 2007 | 03:32 PM
  #3  
Injuneer's Avatar
Administrator
 
Joined: Nov 1998
Posts: 71,094
From: Hell was full so they sent me to NJ
Even after you put the cluster back in, you have to "clear" the codes, or they will remain stored in the PCM for a specific number of drive cycles, then self clear. You can clear the PCM by pulling the "PCM BAT" fuse for 30 seconds..... no need to disconnect the battery.
Old Jan 13, 2007 | 05:04 PM
  #4  
Sinister95Z's Avatar
Thread Starter
Registered User
 
Joined: Jan 2005
Posts: 683
From: Bullhead City, AZ
So, all three of these codes came from the cluster being removed?
Old Jan 13, 2007 | 10:01 PM
  #5  
shoebox's Avatar
Registered User
 
Joined: Dec 1969
Posts: 27,725
From: Little Rock, AR
Originally Posted by gentner_z28
So, all three of these codes came from the cluster being removed?
That's what they are trying to tell you.
Old Jan 13, 2007 | 11:56 PM
  #6  
Sinister95Z's Avatar
Thread Starter
Registered User
 
Joined: Jan 2005
Posts: 683
From: Bullhead City, AZ
Thank you for your help. I guess I will just pull the fuse for a couple minutes now that I have re-installed the cluster. Everything should be all cleared up. Thanks again.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Cam's maro
LT1 Based Engine Tech
23
Mar 24, 2015 08:09 PM
armedtrigger
LT1 Based Engine Tech
10
Feb 24, 2015 08:30 PM
David Dorris
Fuel and Ignition
1
Jan 17, 2015 08:10 PM
91Bird305
Midwest
15
Aug 5, 2002 01:39 PM
LT1
LS1 Based Engine Tech
1
Jul 2, 2002 08:27 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:38 AM.