top end cam!!
Thread Starter
Registered User
Joined: Oct 2004
Posts: 512
From: Austin, Tx
top end cam!!
What cam would you guys recommend for my top end? I already have a good low end, just want to balance things out a bit. Thinking of getting a kit, so what cam would you guys recommend thanks!!!!
Registered User
Joined: Oct 2000
Posts: 1,531
From: Tucson, AZ
Re: top end cam!!
You cam detemines the power band, so if you change the cam, you will change all the characteristics of the motor. So if you do a big cam, you wont have the bottom end power anymore.
Registered User
Joined: Oct 2000
Posts: 1,531
From: Tucson, AZ
Re: top end cam!!
If you are looking for all around power do an LE1.
You sig says you are doing an LE Package soon, talk to him, tell him what you want the car to do and he can set you up with exactly what you want.
You sig says you are doing an LE Package soon, talk to him, tell him what you want the car to do and he can set you up with exactly what you want.
Banned
Joined: May 2003
Posts: 6,661
From: LA (lower Alabama)
Re: top end cam!!
Originally Posted by SStrokerAce
LE2 cam is going to peak at about 6500-6600rpm so on a stock bottom end that's about all the top end you need.
Bret
Bret
Banned
Joined: May 2003
Posts: 6,661
From: LA (lower Alabama)
Re: top end cam!!
Originally Posted by SStrokerAce
Yeah, that part can happen.... most times it's because of the NAZZZ that helps the rod go stage right.
Hell I can't go much smaller with the thing and it has a stout enough TQ curve as it is....
Bret
Hell I can't go much smaller with the thing and it has a stout enough TQ curve as it is....
Bret
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
Gtpguy
General 1967-2002 F-Body Tech
48
Jan 26, 2015 04:50 PM
