Thinking about a cam
Thread Starter
Registered User
Joined: Sep 2001
Posts: 720
From: Indianapolis
Re: Thinking about a cam
I was going to go with a 150 with a retard and all....
75 seems small to me, I am the kind of person who will go big or not go at all but 150 is my limit on the stock bottom end.
75 seems small to me, I am the kind of person who will go big or not go at all but 150 is my limit on the stock bottom end.
Moderator
Joined: Dec 1969
Posts: 10,745
From: Buffalo, New York
Re: Thinking about a cam
Originally Posted by SStrokerAce
Just don't spray it as much....
96SLPSS, gotta PM me man.
96SLPSS, gotta PM me man.
On the subject: if you are using an off the shelf cam, I'd stick with the manufacurers recommendations about springs. And most people should stick with an off the shelf design or go to a guy like Bret for the whole package.
Rich
Registered User
Joined: Oct 2002
Posts: 2,931
From: Upstate NY
Re: Thinking about a cam
Originally Posted by rskrause
Bret: why are you awake? I am (ostensibly) working. Actually, the residents are working and I am "supervising". At this point in my career, I still sometimes have to be awake at 3am but I don't actually have to do much
Supervising in the ER? It must not be a full moon night.
On the subject: if you are using an off the shelf cam, I'd stick with the manufacurers recommendations about springs. And most people should stick with an off the shelf design or go to a guy like Bret for the whole package.
Rich
Rich
Last edited by OldSStroker; May 18, 2005 at 08:19 AM.
Thread
Thread Starter
Forum
Replies
Last Post