Is there a company that makes a bronze gear for the oil pump drive, that actually fit
Thread Starter
Registered User
Joined: Jun 1999
Posts: 90
From: Williamson,WV,USA
Is there a company that makes a bronze gear for the oil pump drive, that actually fit
I bought a comp cam, and did not know at the time that the cam gear needed to be treated. So I ordered a bronze oil pump drive gear, but the inner diameter is not the same as the stock gear that you remove. Is there a company that makes a bronze gear fitted for the Lt1's, thanks?
Registered User
Joined: Nov 2001
Posts: 648
From: Richardson, TX USA
Brian,
I ran into this with cam I bought recently. I ordered a billet cam. It turned out comp used a different billet for the LT1 so it did not require the bronze gear drive. Do a search in the advance section. Lots of info on what you will need if your cam actually requires a bronze drive.
Michael
I ran into this with cam I bought recently. I ordered a billet cam. It turned out comp used a different billet for the LT1 so it did not require the bronze gear drive. Do a search in the advance section. Lots of info on what you will need if your cam actually requires a bronze drive.
Michael
Thread
Thread Starter
Forum
Replies
Last Post
chevroletfreak
LT1 Based Engine Tech
202
Jul 4, 2005 05:00 PM
