LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

Take a guess.......

Old Sep 7, 2004 | 12:09 PM
  #1  
"White Knight"'s Avatar
Thread Starter
Registered User
 
Joined: Nov 2002
Posts: 1,544
From: Michigan
Take a guess.......

What do you guys think i will run--mods in sig. I haven't been to the track for a long time. Basically i added the gears, 3200stall, delteg, a/c delete, a posi that works, pcmforless tune, and a couple other little tune-up things. I just hope i can get into the 12's with what i have. The best i could do a year ago was 14.051 at like 99.9. What do you guys think i should hit this time?
Old Sep 7, 2004 | 12:30 PM
  #2  
Robbie's Avatar
Registered User
 
Joined: Apr 2001
Posts: 586
From: Greenville SC USA
Re: Take a guess.......

Originally Posted by White Knight
What do you guys think i will run--mods in sig. I haven't been to the track for a long time. Basically i added the gears, 3200stall, delteg, a/c delete, a posi that works, pcmforless tune, and a couple other little tune-up things. I just hope i can get into the 12's with what i have. The best i could do a year ago was 14.051 at like 99.9. What do you guys think i should hit this time?
Very low 13's maybe a high 12 if you go on a good day. The potential for 12's is definetly there.
Old Sep 7, 2004 | 12:45 PM
  #3  
"White Knight"'s Avatar
Thread Starter
Registered User
 
Joined: Nov 2002
Posts: 1,544
From: Michigan
Re: Take a guess.......

Yea knowing my luck i won't even make 13.5.
Old Sep 7, 2004 | 05:11 PM
  #4  
Compstall's Avatar
Registered User
 
Joined: Dec 2000
Posts: 2,442
From: Tacoma, WA, USA
Re: Take a guess.......

You should be in the ballpark.
Old Sep 7, 2004 | 07:09 PM
  #5  
Kataklysm's Avatar
Registered User
 
Joined: Sep 2003
Posts: 2,264
From: Boston, MA
Re: Take a guess.......

I'll say lower 13s, if you had DR you could possibly hit 12s.
Old Sep 7, 2004 | 08:41 PM
  #6  
CamaroRob97's Avatar
Registered User
 
Joined: Jan 2002
Posts: 275
From: Goose Creek, SC
Re: Take a guess.......

HeyWhite Knight, how do you feelabout that Delteg opti set up?? I noticed they used it on project snowball and it really has gotten my attention! Have you noticed a "stronger" steady pull above 4k??? How as the installand all the wiring??? I'm really interested in hearing about it!
Old Sep 7, 2004 | 09:52 PM
  #7  
revtime's Avatar
Registered User
 
Joined: Nov 2000
Posts: 2,734
From: Kansas City suburb of
Re: Take a guess.......

I have a few differences in my setup, I run Hooker LTs with purple horny header mufflers and my stall is around 2600 to 2800. I sixty foot 1.9 with 275 Nittos and run 13.4 @ 104. This is with an internally stock LT1 with 150k on it.
Go to the track on a good weather day and you should see very low 13s and possibly a very high 12 with some luck.
Old Sep 9, 2004 | 10:53 AM
  #8  
"White Knight"'s Avatar
Thread Starter
Registered User
 
Joined: Nov 2002
Posts: 1,544
From: Michigan
Re: Take a guess.......

I do have Drag Radials.

I am in the process of the delteg install right now. I will let you know how it goes and what it feels like when she's done. I am really wondering how it will feel too. I Will make a post in a week or two about how i like it.
Old Sep 9, 2004 | 11:25 AM
  #9  
'94 Bad A Z28's Avatar
Registered User
 
Joined: Jan 2001
Posts: 2,905
From: Orlando,Fl
Re: Take a guess.......

slipping tranny
dieing opti
3.73's
2800 stall
CAI
few little pointless things
nitto drag radials

decent 1.872 60' ran a 13.216 @ 103.97 the day before the car only dynoed 262/292 hehe
Old Sep 10, 2004 | 12:48 PM
  #10  
CamaroRob97's Avatar
Registered User
 
Joined: Jan 2002
Posts: 275
From: Goose Creek, SC
Re: Take a guess.......

Sounds goodWhite Knight, and do let us know how it went and how she pulls (differences) above 4k! GoodLuck w/ the install!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
S.J.S.
LT1 Based Engine Tech
13
Aug 6, 2003 01:36 AM
RedRyder518
Site Help and Suggestions
2
May 10, 2003 10:55 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:03 PM.