Summit has new LT1 Trickflow HEAD!
Registered User
Joined: Apr 2002
Posts: 225
From: Out in the sticks of O.K.
Originally posted by nd4spd200
Ok guys i was at a shop a few weeks ago. I don't know if I really should be posting this, but Nick at Nu-tek has a set of these heads in his shop that was given to him by trickflow, they called him wanting him to test them out, They are just starting out with this head, if things work out, from what i have heard there will be diff heads made like bigger runners, and smaller chambers. Nick is going to e-mail me some numbers as soon as he gets them. They are flowing them and dynoing them as cast first, then a comp CNC port job will be done and tested again... hope this helps...
Ok guys i was at a shop a few weeks ago. I don't know if I really should be posting this, but Nick at Nu-tek has a set of these heads in his shop that was given to him by trickflow, they called him wanting him to test them out, They are just starting out with this head, if things work out, from what i have heard there will be diff heads made like bigger runners, and smaller chambers. Nick is going to e-mail me some numbers as soon as he gets them. They are flowing them and dynoing them as cast first, then a comp CNC port job will be done and tested again... hope this helps...
Thread Starter
Registered User
Joined: Apr 2000
Posts: 121
From: reno, nv usa
Re: Summit has new LT1 Trickflow HEAD!
Originally Posted by SStrokerAce
I thought Trick Flow bought TEA.
I've seen 290-300cfm on TFS LT1 heads ported for a 383.
Bret
I've seen 290-300cfm on TFS LT1 heads ported for a 383.
Bret
Summit owns Trick Flow also.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
oldschool
Parts For Sale
16
Feb 9, 2016 09:21 PM