what solid lifters will work on an lt1? i know some people use to run the comp endura lifters. but havent really seen or herd of those lately.

 

Im assuming you will be changing the cam too, but i run the comp solid roller lifters with the Pro Magnum lifters and no problems whatsoever. You really dont have to adjust them as much as people think and when you do it only takes about 30 minutes.

 

yeah im changing the cam... well im changing everything motor took a dump on me a few weeks back.


so they are just standard solid roller lifters? i thought i read that the hydrolics are alot taller then a solid?

 

Comps line is Endure-x. You need a .842 diameter lifter roughly .300 taller to fit in a hydrolic style block. (comp 888-16)

Morel also makes a late model solid roller setup. We ran some in a customers car a few months ago and they looked like a very nice piece, and were lighter than the comp line

 

thanks

 

Crower Severe Duty "Cutaway"