Just as title says, i have done a lot of searching and havent come across a solid answer basically i got a slightly used set of 3/8 SA 1.6 pro mag rockers, in LE heads and i want to go with the beehive springs. are there any issues with pairing the SA rr's with these springs?

 

mine arent 1.6, but they're SA and i've had no problems so far... now i just hope somebody doesnt post saying my engine is gonna explode in a bit.

 

Aren't all Comp ProMag SAs 3/8 studs? If you are using fairly aggressive cam lobes which make your heads work as they were dsesigned to, the 7/16 studs might be a better choice.

I suggest that you discuss this with Lloyd or Bret.

Jon

 

yeah i was planning on going with a LE2 cam, but would i be a bad choise to go with somethign less aggressive, i really dont want to get ride of this setup i just purchased :/

 

The only problem you may have is when using +.050 locks with the SA rockers. This will leave very little valve stem for the rockers to align.