LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

puting dash overlay on need help

Old Dec 25, 2005 | 04:30 PM
  #1  
jmh96z28's Avatar
Thread Starter
Registered User
 
Joined: Dec 2005
Posts: 251
From: BAY AREA
puting dash overlay on need help

i need help on geting the needles off the dash.does ne1 know how 2 tak them off
Old Dec 25, 2005 | 04:33 PM
  #2  
FastZinTennessee's Avatar
Registered User
 
Joined: Mar 2001
Posts: 2,521
From: Costa Mesa, CA
Re: puting dash overlay on need help

I pulled mine straight off, just remember where the needle was pointing so you can re-install it in the exact same position. Might be a good idea to take a digital picture for reference, or at least make a sketch.
Old Dec 25, 2005 | 05:03 PM
  #3  
wrd1972's Avatar
Registered User
 
Joined: Aug 2005
Posts: 4,405
From: Kantuckee Yo'
Re: puting dash overlay on need help

Point them all to a fixed loaction na drecord where they are pointing. This works for all but one.

Lift the needles ABSOLUTELY STRAIGHT UP or you will be screwed.

Press them downward to replace and dont force them, or you will be screwed.

Fire the engine up and ensure that they are accurate, I have even drove with the clear bezel off so I can make on the fly adjustments.
I even went to the interstate and stopwatched myself between mile markers to ensure the speedo is correct.
Old Dec 25, 2005 | 05:21 PM
  #4  
jmh96z28's Avatar
Thread Starter
Registered User
 
Joined: Dec 2005
Posts: 251
From: BAY AREA
Re: puting dash overlay on need help

so how do i get them off then
Old Dec 25, 2005 | 06:42 PM
  #5  
wrd1972's Avatar
Registered User
 
Joined: Aug 2005
Posts: 4,405
From: Kantuckee Yo'
Re: puting dash overlay on need help

Last post, second line. Its right there.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
David Dempsey
New Member Introduction
5
Mar 12, 2016 12:42 AM
Greg88
LT1 Based Engine Tech
2
Sep 20, 2015 07:14 PM
Rod Bender
Fuel and Ignition
25
Sep 16, 2015 01:47 PM
Daluchman1974
Cars For Sale
1
Sep 11, 2015 06:12 AM
scottcba1
Cars For Sale
1
Sep 8, 2015 09:52 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:21 AM.