I am putting the lt4 hot cam and 1.52 roller tipped rockers i know i will need hardened pushrods but will stock length work with decked heads? Any help is appreciated

 

Will if you decked your heads you should check the length with a PR length checker just to be on the safe side. They arent that much money and Comp Cams makes a pretty easy to read one

 

yeah i thought so thanks

 

Hotcam = 1.6 RR's

Do a search...just trying to help you out.

 

The cam doesn't determine the ratio of the rockers.

Always measure and determine your PR length to be sure. I believe the tool is $20.

 

If you are not using guideplates, hardened pushrods are not required.

 

ok well i guess i'm not sure if i'm using guide plates but my buddy has the tool for checking the pr length i am however unsure of the proper procedure for doing so any more help would be appreciated greatly thanks

 

http://www.carcraft.com/techarticles...gth/index.html

 

thank you guys so much for the help your expertise far surpasses mine thanks guys

 

You wouldn't be asking questions if it was the other way around, eh?

 

Shoebox ftw.