hey guys i am putting in some ovc wires could you post pics of where you ran them to the opti? Any help would be good thanks.
-Mike

 

same here!!!!!!

 

The driver side simply hooks to the opti and runs up to the valve cover, its pretty intuitive.
http://www.MyOnlineImages.com/Member...s/DSCF0033.JPG

The passenger side hooks to the opti and first runs behind the power steering pump and PS tube then around the altonator and up to the valve cover. You are following the OEM routing behind the PS pump.
Make sure that the four wires are very neatly placed side by side behind the power sttering pump plus make sure you have a 4-wire orginizer to ensure they stay that way.
You will need to have the altonator off and the PS pump bolts removed to provide access to do this.
My wires are run very neatly to ensure that they stay put and do not come into contact puth pulleys etc.

http://www.MyOnlineImages.com/Member...s/DSCF0030.JPG
http://www.MyOnlineImages.com/Member...s/DSCF0031.JPG
http://www.MyOnlineImages.com/Member.../DSCF00321.jpg


I will try to post some pics tonight.

 

I have some pics on my site. Click the link in my sig.

 

not the best pics, I will post some better tomorrow.

http://forums.importatlanta.com/atta...chmentid=16494

http://forums.importatlanta.com/atta...chmentid=16495

 

Not sure if these will help:

 

Here's two of mine:

 

dude this is one of the best websites I've ever seen....good job....

do you have any meets up in palm beach/

 

[QUOTE=DontMixWithRice]dude this is one of the best websites I've ever seen....good job....

very true bada** site love the car everything done right and sounds sweeeet with that gmmg exhaust.