Please help. intsalled opti..........
02-01-2003, 10:33 AM
#1
Registered User
Thread Starter
Join Date: Nov 2002
Location: Knoxville tn.
Posts: 261
Please help. intsalled opti..........
and then it won't hit a lick. It started one unwillingly and then won't start anymore. Fire is a very weak orange and it will not start now, anyone know it might could be? New cap, Rotor Button, coil and Opti. I have tried another coil and still no help, car was running fine with just some cut out on the top end and now nothing. please chime in if you have any ideas.
02-01-2003, 12:09 PM
#3
Registered User
Join Date: Dec 1969
Location: Little Rock, AR
Posts: 27,709
You must be sure that you:
got the opti on correctly
made sure the electrical harness is connected properly
made sure spark plug wires are on in the correct order
got the opti on correctly
made sure the electrical harness is connected properly
made sure spark plug wires are on in the correct order
02-01-2003, 12:14 PM
#4
Registered User
Join Date: Jul 1999
Location: Wichita Falls, Texas, U.S.
Posts: 525
My guess is that the opti is on wrong. I made the same mistake when I installed mine the first time. My car wouldn't start at all. It would try once in a while but it wouldn't run for more than five seconds and that was like it was running on one cylinder.
02-01-2003, 12:25 PM
#5
Registered User
Thread Starter
Join Date: Nov 2002
Location: Knoxville tn.
Posts: 261
Well this is not the first opti that I have installed. I have installed several with never haveing a prob. I have had it off three different times and same situation. just exactlly what can you do wrong while installing one????
That is bull ****!!!!!
Thread
Thread Starter
Forum
Replies
Last Post
surreybrad
General 1967-2002 F-Body Tech
1
09-29-2015 09:00 PM