LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

PCMforless of Madz28

Thread Tools
 
Search this Thread
 
Old Oct 9, 2004 | 07:11 PM
  #31  
Kreinmc's Avatar
Registered User
 
Joined: Feb 2001
Posts: 622
From: Mesa, Az
Re: PCMforless of Madz28

Originally Posted by indieaz
I'm not sure why kreinmc is flapping his mouth when he runs a full second slower in his car with a bigger cam (cc306 according to his sig). Me thinks he should just shut up if he isn't going to contribute to the thread and answer the original posters question.

That being said, i got a PCM Forless tune here. No complaints about the accuracy of the tune based of scan results. I have not been able to dyno tune yet. I will say that overall the process of dealing with the guys @ PCM forless went really well.
LOL I did have a bigger cam, but did you notice that my heads never came off of the car?? Did you even compare my mods to his? If you did you would notice that my car was not at all built to run at the track. All I did was slap some headers on it and throw a cam in it and take it to the track. Do you have any times to post?
Old Oct 9, 2004 | 10:57 PM
  #32  
lt1camaroman93's Avatar
Registered User
 
Joined: Jan 2002
Posts: 936
From: Merrillville, IN
Re: PCMforless of Madz28

I am very happy with ion/madz28. He tuned my buddys 93 small cam, stock headed, stock bottom end, bolt on car. It ran 12.0@110 (10.91@123 150shot) on a high 80degree day. LPE Z convt were you the guy with the drop top red Z28 at mroz dyno in merriville IN? If so you car is very impresive, and not to mention unbelivalby clean. And on this debate of a heads/cam car going 12.00 That is a fast car for full weight and to drive around. I wouldn't call it overly impressive, but deffinatly something for the owner to be proud of. With bolt on's and no tune my 93 went 12.5@107. I am working out all the bugs on my stock bottom end heads/cam package now.

Last edited by lt1camaroman93; Oct 9, 2004 at 11:00 PM.
Old Oct 9, 2004 | 11:59 PM
  #33  
chrism400's Avatar
Registered User
 
Joined: Jun 2003
Posts: 890
From: Dayton, OH
Re: PCMforless of Madz28

Ion's who I use. I also know guys that use PCM for less. I chose Ion because he knew about Illinois "Double-Sweet" corn.
Old Oct 10, 2004 | 01:05 PM
  #34  
fireman's Avatar
Registered User
 
Joined: Jul 2000
Posts: 814
From: Phoenix AZ
Re: PCMforless of Madz28

Krein's HP was there, look at his mph. The other guys car has "race ported" heads, Krein's heads were stock and made the same mph.

Ask Krein how many miles were on his stock bottem end when he ran 112mph.
Old Oct 10, 2004 | 03:07 PM
  #35  
chrism400's Avatar
Registered User
 
Joined: Jun 2003
Posts: 890
From: Dayton, OH
Re: PCMforless of Madz28

Manual cars typically run 2-4 mph higher than autos. You can't argue with the fact that he was making some really good power though.
Old Oct 10, 2004 | 04:21 PM
  #36  
LT1Squirrel's Avatar
Registered User
 
Joined: Mar 2004
Posts: 923
From: NJ
Re: PCMforless of Madz28

im going to go out on a limb here and say, you'll be just as satisfied with either, reach in your pocket, get a coin, and flip that shiz
Old Oct 10, 2004 | 06:35 PM
  #37  
indieaz's Avatar
Registered User
 
Joined: Aug 2003
Posts: 915
From: Tucson, AZ
Re: PCMforless of Madz28

Originally Posted by Kreinmc
LOL I did have a bigger cam, but did you notice that my heads never came off of the car?? Did you even compare my mods to his? If you did you would notice that my car was not at all built to run at the track. All I did was slap some headers on it and throw a cam in it and take it to the track. Do you have any times to post?
Didn't notice that actually, so my bad. I don't have times to post, i've never taken this car to the track (i just turned 1,000 miles on the engine 2 days ago actually). I've currently got some issues that seem to be opti related and i need some new plug wires (pretty sure i burnt one). Besides i work 50-60 horus a week and go to school full time, so i don't have much time to go o the track or mess with my car any more.

EDIT: However, that doesn't change the fact that you didn't contribute the thread at all, and instead of answering the original posters question you replied to dog on another user which isn't helping the guy out at all.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
football4life
Cars For Sale
2
Oct 4, 2015 07:48 AM
95craz28
Fuel and Ignition
11
Sep 12, 2015 07:47 AM
95z_28_camaro_4_Ivan
LT1 Based Engine Tech
6
Aug 25, 2015 03:59 PM
RallyRed701/2
LT1 Based Engine Tech
2
Jul 27, 2015 02:55 PM
maybe2fast
LT1 Based Engine Tech
6
Mar 16, 2015 11:59 AM




All times are GMT -5. The time now is 07:08 AM.