LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

Paging Shoebox... Part number needed

Thread Tools
 
Search this Thread
 
Old Jul 30, 2003 | 08:51 PM
  #1  
97droptopZ's Avatar
Thread Starter
Registered User
 
Joined: Jan 2003
Posts: 252
From: Louisiana
Question Paging Shoebox... Part number needed

I need the part number for the optispark vacuum harnass with valves, http://csce.uark.edu/~jgbertr/rb/opti_vacuum_hose.jpg
thats off of your site. thanks
Old Jul 30, 2003 | 09:39 PM
  #2  
scoobysnax83's Avatar
Registered User
 
Joined: Sep 2002
Posts: 2,481
From: Arlington, VA
Re: Paging Shoebox... Part number needed

Originally posted by 97droptopZ
I need the part number for the optispark vacuum harnass with valves, http://csce.uark.edu/~jgbertr/rb/opti_vacuum_hose.jpg
thats off of your site. thanks
Well, I've been trying to find it out for you but I can't....Sorry?!?
Old Jul 30, 2003 | 09:55 PM
  #3  
shoebox's Avatar
Registered User
 
Joined: Dec 1969
Posts: 27,730
From: Little Rock, AR
12555323 is for the two hose (vent and vacuum) harness with the valves on it.
Old Jul 30, 2003 | 09:56 PM
  #4  
scoobysnax83's Avatar
Registered User
 
Joined: Sep 2002
Posts: 2,481
From: Arlington, VA
Originally posted by shoebox
12555323 is for the two hose (vent and vacuum) harness with the valves on it.
where did you get that from?
Old Jul 30, 2003 | 10:16 PM
  #5  
shoebox's Avatar
Registered User
 
Joined: Dec 1969
Posts: 27,730
From: Little Rock, AR
Originally posted by scoobysnax83
where did you get that from?
I have a note with that part number and it is also listed on the optispark swap page. I think I have seen it in the parts book, but it is hard to find if even in there.
Old Jul 30, 2003 | 10:41 PM
  #6  
CoUnTryMuZiCZ28's Avatar
Registered User
 
Joined: Jul 2003
Posts: 1,416
From: Davie FL
Could i have the part number for the oil dipstick in a 95 Z28? I dont need the whole tube just the stick with the yellow handle. I cant seem to find it anywhere.

Thanks
Nick
Old Jul 30, 2003 | 10:47 PM
  #7  
shoebox's Avatar
Registered User
 
Joined: Dec 1969
Posts: 27,730
From: Little Rock, AR
Originally posted by CoUnTryMuZiCZ28
Could i have the part number for the oil dipstick in a 95 Z28? I dont need the whole tube just the stick with the yellow handle. I cant seem to find it anywhere.

Thanks
Nick
GM PART # 12551144
Old Jul 30, 2003 | 10:49 PM
  #8  
CoUnTryMuZiCZ28's Avatar
Registered User
 
Joined: Jul 2003
Posts: 1,416
From: Davie FL
THANK YOU, YOU HAVE NO IDEA HOW MUCH YOU JUST HELPED ME. lol
Old Jul 31, 2003 | 06:14 AM
  #9  
Mtrhds94Z's Avatar
Registered User
 
Joined: Mar 2000
Posts: 1,955
From: Point Pleasant, NJ... USA
Originally posted by shoebox
12555323 is for the two hose (vent and vacuum) harness with the valves on it.
Rob I have in my notes here p/n 12556174 [says it's '96 revised vacuum hose harness']
Source was the Feb 2001 'Corvette Fever' opti venting mod for non vented article[got it off of the 'muttvette' site a while back]
Curious if both p/n's could be valid p/n's for opti venting?
Old Jul 31, 2003 | 08:28 AM
  #10  
shoebox's Avatar
Registered User
 
Joined: Dec 1969
Posts: 27,730
From: Little Rock, AR
Originally posted by Mtrhds94Z
Rob I have in my notes here p/n 12556174 [says it's '96 revised vacuum hose harness']
Source was the Feb 2001 'Corvette Fever' opti venting mod for non vented article[got it off of the 'muttvette' site a while back]
Curious if both p/n's could be valid p/n's for opti venting?
Hmm...don't know. 12556174 does not come up when plugged in at gmpartsdirect web site.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
parkers Z28
LT1 Based Engine Tech
10
Mar 11, 2016 08:14 PM
FirebirdGT
Suspension, Chassis, and Brakes
1
Dec 13, 2014 10:25 PM
Brandon Wittmer
General 1967-2002 F-Body Tech
0
Dec 7, 2014 12:15 PM
CobraEatr
Car Audio and Electronics
3
Jul 22, 2002 09:49 AM




All times are GMT -5. The time now is 10:28 PM.