Paging Shoebox, need help IDing wiring harness
Registered User
Joined: Nov 2000
Posts: 63
From: San Diego, CA
Re: Paging Shoebox, need help IDing wiring harness
Originally Posted by madwolf
Unfortunately there is no diagram for the whole I/P harness. It's split into many pages for each of the devices connected to it.
I did scan the diagrams for the 2 engine to i/p harness connectors.
Here they are:
C220
C230
If you need help with some specific wires not found on these two diagrams, just let me know their color and I'll try to locate them for you.
Rob, I just emailed you this and some other stuff.
I did scan the diagrams for the 2 engine to i/p harness connectors.
Here they are:
C220
C230
If you need help with some specific wires not found on these two diagrams, just let me know their color and I'll try to locate them for you.
Rob, I just emailed you this and some other stuff.
Registered User
Joined: Nov 2000
Posts: 63
From: San Diego, CA
Re: Paging Shoebox, need help IDing wiring harness
Originally Posted by madwolf
You will need a factory shop manual for a 96. I have one for a 93 and 95 but they are not the same as 96.
Registered User
Joined: Dec 1969
Posts: 27,728
From: Little Rock, AR
Re: Paging Shoebox, need help IDing wiring harness
Originally Posted by 96camarors
What book did you get these from? I need those exact diagrams for a 96 3.8L
Registered User
Joined: Nov 2000
Posts: 63
From: San Diego, CA
Re: Paging Shoebox, need help IDing wiring harness
Originally Posted by shoebox
Those are listed here on my web site. Exceptions are noted for the V6 car. Maybe you are the person that emailed me about this?
I wasn't the one that email you, but it could have been the guy from my shop, since I sent him to your page
Thread
Thread Starter
Forum
Replies
Last Post
CobraEatr
Car Audio and Electronics
3
Jul 23, 2002 06:32 PM