Is it important to keep the lifters and pushrods in the same order if I plan to use a different cam (Hotcam) and roller rockers (Comp SA ProMags)?
I have allready mixed up the order of the pushrods but the lifters are still in place. Thanks, Brad

 

its always better to try and keep the lifters in order, but with a roller cam/lifters you will be fine if they get out of order

pushrods doesnt matter

 

i didn't think it really mattered as long as you kept the lengths of both about the same across all of the lifters/rods so the rocker geometry was as close to the same as possible

 

the pushrods are all the same length