opti install
#1
opti install
I have a 1994 LT1, but I have just finish building a nasty 355. It has all the upgrades like, 95 vented opit,cover etc. I noticed that when I was install the 95opti that is was very hard to go into the cover(95cover). I lined up the dowelpin and tried to push it in. It feels like I am going to break the thing. Any info?
Thanks Mark Tisdale
Thanks Mark Tisdale
#3
Re: opti install
Check what shoe said.
With that being said, mine was a real PITA too. Im not sure what was causing it, but finally i hit the right angle and it just snapped on perfectly. Dont force it. Just take it off and keep trying to put it back on.
With that being said, mine was a real PITA too. Im not sure what was causing it, but finally i hit the right angle and it just snapped on perfectly. Dont force it. Just take it off and keep trying to put it back on.
#4
Re: opti install
Yea, I am going to try that. It is an aftermarket ground cam but, it was on another car that had the 95opti etc and it worked. I will just have to be patient.
Thanks Guys
Thanks Guys
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM
Sergio
LT1 Based Engine Tech
11
01-27-2016 04:27 PM