I just bought a 12 bolt housing out of a 68 Camaro. What needs to be done to the housing to make it fit in my 94 Z28? Thanks for the help guys. Tom

 

Needs a torque arm mount cast into the housing, or some sort of bolt-on mount invented. Needs to be cut or widened to the correct width. Needs all the mounting brackets (springs, shocks, LCA's, panhard rod) and the brake mounting plates swapped over.

 

make sure you have a qualified person weld on the correct pieces to the cast iron, as this is hard to do, yu don't want some hack job where the weld looks safe but isn't.