need throttle cable measurement from stop
Thread Starter
Registered User
Joined: Mar 2003
Posts: 1,240
From: Markham, ON
need throttle cable measurement from stop
if anyone could take a measurement of their LT1 throttle cable, and possibly take a picture of where they measured from if its from a different spot from mine.
trying to put an LT1 TB on my l98 stealth ram car (with manual trans so kickdown cable is not an issue). i measured exactly 6" from the very tip of the post on the end of the cable to the tip of the black triangular piece. i need about an extra 1/4" of cable for the throttle blade to rest against the idle screw
trying to put an LT1 TB on my l98 stealth ram car (with manual trans so kickdown cable is not an issue). i measured exactly 6" from the very tip of the post on the end of the cable to the tip of the black triangular piece. i need about an extra 1/4" of cable for the throttle blade to rest against the idle screw
Registered User
Joined: Aug 2002
Posts: 4,676
From: Melvindale, MI, US
your best bet might be to slot the top hole in the bracket, to allow the cable clip to sit a little closer tot he T/B
perhaps use a socket head cap screw(allen head) to allow the bolt to sit right against the bracket
perhaps use a socket head cap screw(allen head) to allow the bolt to sit right against the bracket
Thread
Thread Starter
Forum
Replies
Last Post
carguyshu
Parts For Sale
20
Jan 22, 2017 11:19 AM
