Need some help with Ford #42 injectors.
02-01-2006, 10:25 PM
#1
Registered User
Thread Starter
Join Date: Jun 2004
Location: Ontario, California
Posts: 60
Need some help with Ford #42 injectors.
I have the Ford #42 injectors, part # M-9593-F302 So the guy who will program my PCM, he wants to know what pressure the injectors rated at.? Because he says," the flow rating by
itself is not enough..." If anyone knows it, please let me know. Thanks.
itself is not enough..." If anyone knows it, please let me know. Thanks.
02-01-2006, 10:35 PM
#2
Banned
Join Date: May 2003
Location: LA (lower Alabama)
Posts: 6,661
Re: Need some help with Ford #42 injectors.
Originally Posted by desertfox
I have the Ford #42 injectors, part # M-9593-F302 So the guy who will program my PCM, he wants to know what pressure the injectors rated at.? Because he says," the flow rating by
itself is not enough..." If anyone knows it, please let me know. Thanks.
itself is not enough..." If anyone knows it, please let me know. Thanks.
02-01-2006, 11:20 PM
#4
Administrator
Join Date: Nov 1998
Location: Hell was full so they sent me to NJ
Posts: 70,673
Re: Need some help with Ford #42 injectors.
From my experience, a lot of the Ford injectors are rated at 2.7bar (39.15psi). When running at 3bar (43.5psi), they will flow 5.4% more than they are rated to flow at 39.15psi.
Thread
Thread Starter
Forum
Replies
Last Post
autoxr166
General 1967-2002 F-Body Tech
0
09-25-2015 04:21 PM