LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

Need 95 T/A wiring info?????????

Thread Tools
 
Search this Thread
 
Old Oct 17, 2003 | 10:34 PM
  #1  
john5.7 87Iroc's Avatar
Thread Starter
Registered User
 
Joined: Jan 2000
Posts: 57
From: Charlotte, North Carolina
Need 95 T/A wiring info?????????

Can anyone get me the some wiring diagrams or some sort of info for the headlights, fog lights, dimmer, trunk release, whole HVAC unit and anything else on the dash I am forgetting (don't need cluster or radio)

Basically what I really need is the colors of the wires and the function of each wire on a 95 Trans AM dash. Thanks.
Old Oct 19, 2003 | 07:46 PM
  #2  
john5.7 87Iroc's Avatar
Thread Starter
Registered User
 
Joined: Jan 2000
Posts: 57
From: Charlotte, North Carolina
TTT
Old Oct 24, 2003 | 10:07 PM
  #3  
john5.7 87Iroc's Avatar
Thread Starter
Registered User
 
Joined: Jan 2000
Posts: 57
From: Charlotte, North Carolina
Anyone have a shop manual they could look it up for me in? Thanks
Old Oct 24, 2003 | 10:10 PM
  #4  
NewbieWar's Avatar
Registered User
 
Joined: Sep 2003
Posts: 2,370
From: Germany
i got a haynes repair manual and its got a few diagrams in the back, but i couldnt tell u what it all ment
Old Oct 24, 2003 | 10:28 PM
  #5  
shoebox's Avatar
Registered User
 
Joined: Dec 1969
Posts: 27,728
From: Little Rock, AR
Try this that was posted the other day. Wiring is pretty hard to read compared to the factory manual, but there should be some info there.
Old Oct 26, 2003 | 08:18 PM
  #6  
john5.7 87Iroc's Avatar
Thread Starter
Registered User
 
Joined: Jan 2000
Posts: 57
From: Charlotte, North Carolina
Originally posted by shoebox
Try this that was posted the other day. Wiring is pretty hard to read compared to the factory manual, but there should be some info there.
ThanX. It was a hard to read but from what I saw, it didn't have any of the info I needed. If anyone else has a manuel and can get me the info let me know.
Old Oct 26, 2003 | 08:35 PM
  #7  
SWINGRRR's Avatar
Registered User
 
Joined: Oct 2002
Posts: 748
From: P-cola Fl
For the headlights.... with or without Daytime running lights?
I'll send you what I got. Hope it helps.
Old Oct 26, 2003 | 09:41 PM
  #8  
john5.7 87Iroc's Avatar
Thread Starter
Registered User
 
Joined: Jan 2000
Posts: 57
From: Charlotte, North Carolina
See what Im doing is installing a 4thgen T/A dash into my 3rdgen 87 Camaro. Ive got the dash and all the wiring and dash componants and right now Im cutting all the connectors off the 95 wiring harnessfor the dash and Im trying to match up the wires to my 3rdgen harness.
So I guess it wouldn't matter it was for DRL's or not? Since 3rdgen didn't have them.
ThanX alot.

Can't seen to find where I placed my plugs for the headlights and stuff but here are the colors I have for the 4th gen plugs on back of hvac .

plug 1
yellow
orange
tan
light blue
green

plug2
gray
black

plug3
black
brown
purple
orange

plug4
dark green/white
light green
gray
Old Oct 26, 2003 | 09:46 PM
  #9  
john5.7 87Iroc's Avatar
Thread Starter
Registered User
 
Joined: Jan 2000
Posts: 57
From: Charlotte, North Carolina
Originally posted by SWINGRRR
For the headlights.... with or without Daytime running lights?
I'll send you what I got. Hope it helps.
just got the email Ill take a look at it. ThanX
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jayvar
General 1967-2002 F-Body Tech
9
Feb 2, 2015 10:00 PM
bernie1951
New Member Introduction
7
Dec 10, 2014 10:03 AM
Brandon Wittmer
General 1967-2002 F-Body Tech
3
Dec 3, 2014 09:28 PM
Wilson
Car Audio and Electronics
0
Jul 21, 2002 05:08 PM




All times are GMT -5. The time now is 02:12 PM.