Finally got my car to the dyno and was pretty pleased with the numbers it put out for how hot it was (90 degrees 70% Hum)...

330hp and 327tq (mods in sig) The pcmforless programming was perfect...

But... I found something out, my tach is WAY off... I told them to take it to 6200 rpms and he did according to my tach... As we looked at the dyno sheet we noticed that it said he only went up to 5600-5700 (HP was still climbing a little when he let off) for all three runs... But we already had the car pulled off the dyno when we noticed and it was burning hot so we couldn't put it back on to see the difference. Maybe I'll head out there again some other time.

On the bright side, that explains my low trap speed (106-107) for a M6 hotcammed car, I was actually shifting at 5600 the whole time at the track...

I'll try to find someone with a scanner and show you guys the dyno here soon.

 

Cool, now get a real tach in there, take it up to 6300, and tell us how it goes at the track