MSD has finally made an optispark
Administrator
Joined: Nov 1998
Posts: 71,097
From: Hell was full so they sent me to NJ
Re: MSD has finally made an optispark
The un-vented Opti has a different configuration on the internal metal cover, the optical wheel is spot-welded to the carrier, where in the vented Opti it is screwed on. The electrical connector is a different size/shape.
Registered User
Joined: Nov 2001
Posts: 3,515
From: Kansas
Re: MSD has finally made an optispark
My 2-yr old opti had as very strong seal that made it exceptionally difficult to get appart even after I had confirmed it was a total loss so I was being quite rough with it. GM makes them a little better than they used to it appears.
Registered User
Joined: Nov 2002
Posts: 4,784
From: Jacksonville
Re: MSD has finally made an optispark
Originally Posted by RE AND CHERYL
Seeing as my Delteq equiped car has been running flawlessly for the last 6 months on an Opti that was so bad the car would barely run. I'm gonna have to say your wrong. Many members of this site have replaced their Optis more than once. Paying $200 or more each time. At 110k I've never changed mine, and unless the bearing goes I won't. For $600 I've got the best ignition system you can bolt to these cars, and it's money I'll only spend once.
LTCC
Thread
Thread Starter
Forum
Replies
Last Post