the msd kit is about $80.

and the taylor OVC kit is $99.


is the MSD (part 32149) and OVC, or stock routing?

how do i get OVC with MSD wires?

 

MSD-32149 isn't OVC it is for the stock routing position.

I ended up going with the Taylor wires because I had a hard time finding the right MSD kit.

As far as I know the MSD wires come with the opti ends on it.

 

Summit carries the MSD cut to fit wires with opti ends,i believe the part number ends in 99. The opti ends are pre installed.

You will have to call and have them look through the MSD book,i had a set,but box is long gone.

 

so i guess im stuck with taylors if i want OVC?

 

MSD P/N 32139 are the cut-to-fit Superconductors with opti ends. I've been using these with R&M looms with good success.

 

got_hp,the taylor "kit" is a complete setup from Thunder racing.
The MSD's will just be the wires. You can get differetn looms for the MSD's if you want.
So you arent "stuck",you just would have to piece together another setup for the msd wires.