CamaroZ28.Com Message Board

LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

Moroso CAI fit a thirdgen engine bay using a stock LT1 elbow and MAF?

Thread Tools
 
Search this Thread
 
Old 04-11-2004, 02:01 AM
  #1  
Registered User
Thread Starter
 
Pasky's Avatar
 
Join Date: Jan 2003
Posts: 1,362
Moroso CAI fit a thirdgen engine bay using a stock LT1 elbow and MAF?
I dont wanna spend the 180 to ship it to my house and find out the thing won't fit . Anyone have any experience using a moroso CAI on a lt1 in a thirdgen? Thanks.
Pasky is offline  
Reply
Old 04-11-2004, 02:03 AM
  #2  
Registered User
 
97WS6SCharged's Avatar
 
Join Date: Nov 2002
Location: Jacksonville
Posts: 4,784
It will probably take a little modification to make it work, but it should fit for the most part. Which side of the car is your battery on?
97WS6SCharged is offline  
Reply
Old 04-11-2004, 02:15 AM
  #3  
Registered User
Thread Starter
 
Pasky's Avatar
 
Join Date: Jan 2003
Posts: 1,362
Passenger obviously, wouldn't be able to use the stock lt1 elbow if not. Yea, I really dont feel like modding a CAI kit though which is why im asking, i'd make my own if im gonna go through that kinda trouble.
Pasky is offline  
Reply
Old 04-11-2004, 02:21 AM
  #4  
Registered User
 
97WS6SCharged's Avatar
 
Join Date: Nov 2002
Location: Jacksonville
Posts: 4,784
You could flip it around if your battery was on the driver side. I was just asking because in my 87 GTA, the battery was on the driver side.
97WS6SCharged is offline  
Reply
Old 04-11-2004, 02:37 AM
  #5  
Registered User
Thread Starter
 
Pasky's Avatar
 
Join Date: Jan 2003
Posts: 1,362
Mine too, I switch it though. If I flipped the elbow, i'd have to extend the wires for the maf and IAT and also the vacuum to my opti.
Pasky is offline  
Reply
Old 04-11-2004, 02:39 AM
  #6  
Registered User
 
97WS6SCharged's Avatar
 
Join Date: Nov 2002
Location: Jacksonville
Posts: 4,784
There's always the Home Depot special. PVC pipe and some 3.5" silicon tube from Napa.
97WS6SCharged is offline  
Reply
Old 04-11-2004, 02:40 AM
  #7  
Registered User
Thread Starter
 
Pasky's Avatar
 
Join Date: Jan 2003
Posts: 1,362
Exactly what I was thinking but I want a cleaner look,
Pasky is offline  
Reply
Old 04-11-2004, 02:45 AM
  #8  
Registered User
 
97WS6SCharged's Avatar
 
Join Date: Nov 2002
Location: Jacksonville
Posts: 4,784
10 layers of chrome paint looks pretty good on PVC pipe. Been there, done that.
97WS6SCharged is offline  
Reply
Old 04-11-2004, 01:32 PM
  #9  
Registered User
Thread Starter
 
Pasky's Avatar
 
Join Date: Jan 2003
Posts: 1,362
lol, that sounds too redneck .
Pasky is offline  
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Granatelli Motor Sports intake and airbox, with aluminum elbow and MAF
formula218
Parts For Sale
1
12-02-2014 04:27 PM
Who Wants a MSD Replacement for the Opticrap?
ScottZ
LT1 Based Engine Tech
231
03-03-2004 01:34 PM
Can I have a name change?
TheV6Bird
Site Help and Suggestions
1
08-27-2002 10:38 PM
Upgrade from stock set-up and hand's free cell phone set-up ?
jim88iroc305
Car Audio and Electronics
1
08-13-2002 09:24 PM
Running an amp w/ pulleys
kurob25
Car Audio and Electronics
1
08-05-2002 08:03 PM
Back to Subforum
LT1 Based Engine Tech
View Next Unread
question bout gasket change




Advanced Search
Quick Reply: Moroso CAI fit a thirdgen engine bay using a stock LT1 elbow and MAF?


Reply Closed Thread Share

All times are GMT -5. The time now is 04:15 PM.