Manual Fan Switch Help ASAP
#1
Manual Fan Switch Help ASAP
Did the manual fan switch mod this evening on my 97 Z.. Works great fans come on exactly as they should.. used http://www.xious.com/camaro/install-fanswitch.html as instructions. Only problem when the car is running, if I kick the fans on after about 5 seconds the SES light comes on.. I soldered all my connections so I know they are good.. can anyone help?? TIA
Craig
Craig
#2
Add the resistors in this diagram and it should stop the SES from coming on.
#4
Originally posted by importeater
1 resister on the green and 2 on the blue piggy backed? I really appriciate the quick responce, thanks a lot!!
1 resister on the green and 2 on the blue piggy backed? I really appriciate the quick responce, thanks a lot!!
Thread
Thread Starter
Forum
Replies
Last Post
slothgrant
Car Audio and Electronics
0
08-22-2002 03:01 PM