there is only one listing for an LT1 TB on AS&M's website and it looks just like the one i have, it also says no wire modification is required and uses stock TPS and IAC. the TPS looks fine but it uses a bolt in style IAC that is different from my 93. has any one had this happen before? anyone have any suggestions?

thanks alot guys.

 

anyone? I tried calling AS&M but i got no answer.

thanks

 

Same here, called yesterday too. Although today it said that the line was busy and I left a voicemail. I had some questions about my AS&M 58mm TB.

I'm trying to figure out if it will work with a 700R4 TV cable, you probably should too.

I'll go look at mine.

-Dustin-

 

You can use the stock IAC housing from your 93s T/B. The real issue would be the TV cable stud on the linkage. I have one on my 97 and the IAC housing was used from my stock T/B. But of course the 97 has no 700 lug on it.

 

I spoke with and emailed a picture to AS&M of my 58mm TB. The representative I got ahold of through AIM user name "AZSpeedandMarine". Who thought that would work better than a phone call? Anyways he said that near the top of the plastic plate there is a 1/4 drilled spot that doesnt go all the way thru. He said all I would need to do is drill that thru to fit the TV cable and it should work fine. Hopefully that clears things up with you guys. Good luck.

-Dustin-