LT4 hot cam kit Q's!!!

Reply Subscribe

Thread Tools

Search this Thread

Feb 10, 2003 | 11:45 AM

#16

Smoke T/A

Registered User

Joined: Jul 2001

Posts: 718

From: Wichita Falls,Texas

Quote:

Originally posted by vodoo-chile
I ended up ordering a new Opti. Should be here on Wed or Thur. It took about 45 min, start to finish, to get the Opti off . this was from car running to putting tools up. pretty good, I think. I took my old Opti apart, nothing loose but the bearing on the back seemed to move the shaft a bit. I'll see though. Quick question Joe. Does the new opti come with the cam interface (the part that goes over the dowl pin)?

Kyle

Cool. Hope you can get it back together to come by SLP day??? Yeah is should look just like the one you pulled out. If looking at the back of it is should have 3 holes and 1 for the dowel that is shaped lile a U and dosen't look like the other 2. The other 3 holes are to clear the 3 cam bolts. The #'s 1 and 6 are for the firing order it is in. HTH

Joe