Does anybody know where to find one of these? It's no longer in production, and even with the part number I've been unable to locate one, or even a substitute.

 

If you have the original one just measure the thickness, OD, and ID, and order the correct size washer from someplace like Fastenal, McMaster Carr, etc.

 

Are you talking about a spacer to fill the gap between a 96-7 hub and the crank gear?

 

Problem is I don't have the original, it had to be dremeled out (Long story). It's the washer that goes between the crank hub bolt and the crank hub, screws into the crank snout

Oh, and it's a 93

 

Will this work.
ARP 234-2501 - ARP Balancer Bolt Kits - SummitRacingEquipment.com
I know you just need the washer but its a start.

 

Go to your local pick and pull and unscrew one from one of the Chevy engines

 

Thought I'd update this just for completeness...We finally found a dealer in Florida that had 2, so if anyone needs one look there first, there's one left. I also have the original (apparently it DIDN'T end up being sacrificed to the Dremel god), so if anyone's in a bind let me know...