I am debating on trying another heads/cam set up this winter.. i want a set up that with an m6 will put down 390+ with ported lt1 casting and hydrolic roller camshaft. Does anyone have any hp numbers with a set of loyd elliots heads?? Any other sugestions on where to get the heads done for a good price, as i will not have to much money to spend on this. I already have all the bolt ons to go along with it.

 

My setup makes 380rwhp with a dyno tune. Need a bigger cam to get to 400. Kmook I believe has 400rwhp with a 230/236 cam. Search his user name, his dyno graph may still be posted.
My flow numbers of the LE heads I got are in the link.

Jeff D.

 

Ken would be loaded if he got royalties every time his dyno graph was posted.
Jeff, who did your dyno tune?

 

LOL I should get royalties!

 

I am expecting to be around 390rwhp with my current mail order tune, and maybe a little more with a dyno tune once I finish the install.

 

i dont have dyno numbers yet but my heads flowed by loyde flowed at a 600 lift 273 on the intake 192 exhust he is a great guy to work with and he answered all my questions he did this all very cheaply look at this site for more info on flow numbers http://www.malcams.com/legacy/misc/headflow.htm good luck

 

RealQuick-is your sig updated for your 390RWHP combo?

 

Sorry dude, its not. Probably confusing huh. I am currently installing the following:

Lloyd's stage 2 heads (2.00/1.56)
Jet Hot LT's
Mufflex y-pipe
CSI Electric WP
Cloyes TDR timing chain
AFPR
Keyed hub
(other little stuff like shift light, gauges...stuff like that)

My numbers are with home ported heads (1.94/1.50) and SLP shorties. I hope to get 390rwhp once I finish assembling. Just waiting for some powdercoated parts.

 

I think you'll see what your looking for with that combo...good luck!

Brad

 

Thanks dude. I'll post results once I get it together and it is running properly.