i jumped a 4" curb pretty hard f'in around like a dumb f%$#!!! anyway i have to hold the wheel at 2:00 to keep car straight.. doesnt rattle or shake that bad untill i hit brakes but it did that before... im putting it on the rack tomarrow.. what do i look for?

 

I dont remember the part name but it is a 10" straight 0.5 inch in diameter piece of metal. About $15.99 in Auto zone + 30 minutes of work...

 

I've done that before. I did like a 360 while doing it too.

I just simply had to get all aligned.

 

Inner, outer or both, tie rod ends would be a good bet.

 

whats that thing from autozone your talking about?...this same thing happened to me(so to feel to bad) and have the same problem...what should i ask them for?...thanks Tony

 

Tie rod end” Depend which wheel hit the curb that tie rod end you will need. It just bent so the best thing is to replace with a new one and then to and do wheel alignment.

 

Hopefully you didn't do any damage that requires the vehicle to goto a body shop. I work in a shop and see frame/structural damage all day long.

 

ah just jump one the other way it allways works on the old winter beaters