What information do I need to supply to get a tune? Do I need to supply information on head porting, rear end gears, etc? I assume the cam specs would have to be given. Duh, but besides that.

Who should I get a tune from? How much will it cost?

I am going from a cc305 setup with comp springs to a gm847 setup with comp 987's. Besides that, I'm changing my exhaust from flowmaster american thunder with y-pipe to dr.gas x-pipe with dynomax bullets. I am also changing my wheels from 16" to 17" all the way around. Oh yea, and my connecting rods are 6", not 5.7". Will that matter. I went to Ross and they said that if you're using a 90450 piston, you're supposed to use a 5.7" rod. Lastly, my compression ratio will be going from 10.8 to 11.2.

I was told by a friend that someone named madz? would do a mail-in tune for $40. Is this true?

 

Madz28 does very good tunes from what I hear. So does pcmforless. On their website is a order form that ask you all those questions...www.pcmforless.com
I am suprised that you didn't have a tune for the cc305 you were running???

 

I bought the motor with the cc305 and pcm as a package. I think it had a pcmforless tune already on it.

 

Too bad your not closer to charlotte.

We can have bryan load you up a tune and I can fine tune it on the dyno here.

 

How much $$$?

 

I really am going to need to send my pcm off this weekend. Someone please give me info.

 

Sorry I didn't see this sooner.

Bryan said $400 including the dyno time.

 

Call up Jeff Creech at Carolina Auto Masters. The best tuner out there.

www.carolinaautomasters.com

 

Ion is very good and has the best prices......

 

how much should it be just for a mail-order tune?

 

Call Jeff and ask. He really isn't that far from you either. Put it on the dyno and do it right.

 

$99

$50 if you have your own cable.

The dyno time is what cost so much and Bryan included it in the price.